Menu 1- User Settings
Ignition ON-OFF-ON-OFF-ON
Press & Release Program Button
Press Button #1
Setting 1 Ignition Auto Lock
1) Ignition Lock & Unlock Enable 1 Flash/Honk Doors Lock/Unlock with Ignition key.
2) Ignition Lock Only 2 Flashes/Honks Doors Lock when ignition is turned ON only.
*3) Ignition Auto Lock Disable 3 Flashes/Honks Doors do not Lock/Unlock with Ignition key.
Press & Release the Program Button 1 Time (Setting 1) Confirmed with 1 LED flash.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 2 Horn Honk Settings (Auxiliary Connector Pin 5)
1) Lock & Unlock chirps Disable 1 Flash/Honk Honks for Panic/Car Finder Only.
2) Lock & Unlock chirps Enable 2 Flashes/Honks Honks for Lock/Unlock/Panic/Car Finder Only
*3) All Chirps Enable 3 Flashes/Honks Honks for all features.
Press & Release the Program Button 2 Times (Setting 2) Confirmed with 2 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 3 Door Lock Options
1) Double Unlock Pulse 1 Flash/Honk .75 Second lock & 2 unlock pulses
2) 3 Second Lock & Unlock 2 Flashes/Honks 3 Second Lock & Unlock Pulses
*3) .75 Sec Lock & Unlock 3 Flashes/Honks .75 Second Lock & Unlock Pulses
Press & Release the Program Button 3 Times (Setting 3) Confirmed with 3 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 4 Door Unlock & Disarm Pulse Duration
1) Short Pulses 1 Flash/Honk 125ms pulses on Unlock & Disarm outputs
*2) Normal Pulses 2 Flashes/Honks 750ms pulses on Lock/Unlock & Disarm outputs
Press & Release the Program Button 4 Times (Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
*Settings 5, 6 and 7 are not available.
Page 16
INSTALLATION MANUAL 2WAY REMOTE VEHICLE STARTER
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and
Release the
Program Switch
1x =Setting 1
2x =Setting 2
3x =Setting 3....
Press and
Hold the
Program Switch
1x = Option 1
2x = Option 2
3x = Option 3....
Press button
1toenter
Program Menu 1
1
2
3
4
(122 paginas)
(28 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales