Ultra Start 15xx Manual de usuario descargar pdf (Pagina 44)

TDC Ultra User’s Manual

4-4

FP1 & FP2 (Foot Pedal 1 & 2)

The Foot Pedal 1 and 2 options allow you to assign a default class

for any Foot Pedal switches you are using for the study. These de-

vices plug into the Bank 1 and 2 slots on the top of the TDC Ultra

(next to the Comm Port) and allow you to use your foot to record

a class rather than pressing the key with your hand.

When you select either

FP1 or FP2, you will see

a screen similar to the one

shown here. Enter the class

number you want to use as

the default for the foot

pedal, using the 14 yellow classiﬁcation keys, then press the DO

key to return to the Options menu.

Once you have set the options the way you like, press the DO key while

STRT is ﬂashing and you will be prompted to select a site code type

and assign a site code. Refer to chapter 2 for information on selecting

a site code.

Start Study

After you have selected a Site Code, you are ready to start the study.

The top line of the display shows the type of study and the mode being

used. The second line shows the currently active class. The third line

shows the data as you record it, while the fourth line shows the current

count number and the current time so that you can start the study at a

speciﬁc time.

To record your data, take note of the Active Class. For any vehicles that

you record in this class, you only need record the turning movement by

pressing one of the 16 gray movement keys. The TDC Ultra automati-

cally assigns the active class to the movement.

Foot Pedal 1 code:03

Press CLS key to sel

Press DO to enter

Turn by Cls. SIMUL

Active CLS: [02]

CLS/Key:02/07 (01)

15:26:44 Count:03

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 123 124

Sin comentarios

Ultra Start 15xx Manual de usuario Pagina 44